Varisco Self-priming Pump J Series

VARISCO J Series

Varisco J series are powerful self priming centrifugal pumps. Due to open type impeller these pumps are perfectly suitable for pumping of liquids that contain large size solids, as well as for working in extreme conditions.

FEATURES

• Rapid self-priming: without foot valve
• Simple construction and easy inspection
• High resistance to abrasive liquids
• Axial mechanical seal lubricated from the outside.
• Easy to install
• Long life: parts subject to wear can be easily replaced

APPLICATIONS

INDUSTRY

• Transfer: clean, dirty, containing sand in suspension, muddy, neutral, alkaline, acidic liquids; low viscous petroleum products, solvents even if dirty; milk of lime, caustic soda; washing, cooling, recirculation, smoke scrubbing
• Treatment: pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge
• Naval: loading and unloading; bilge pumping; washing, fire-fighting, stripping, sanitary duty and circulation
• Agriculture: surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers; distribution of liquid animal feed; transfer of must; washing.

CIVIL ENGINEERING

• Drainage of excavations, canals or ponds
• Ground water dewatering with drains
• Water supply from wells or canals
• Washing concrete castings and aggregate
• Recirculation of bentonite and drilling mud

SAFETY

• Drainage after flooding or torrential rains
• Emergency duty: temporary sewage pumping; fire fighting; recovery of dangerous liquids

OPERATING RANGE

• Capacity from 22 m3/h to 1400 m3/h
• Suction height up to 7,5 m
• Solids handling up to 76 mm